Complete Set Of Online Heating Of Aluminum Ingots

The complete set of online heating equipment for aluminum ingots is designed with an electromechanical integrated structure (our company has applied for an appearance patent for this structure, patent number ZL 2014 3 0013074.X).

The complete set of online heating equipment for aluminum ingots is designed with an electromechanical integrated structure (our company has applied for an appearance patent for this structure, patent number ZL 2014 3 0013074.X). The complete set of equipment includes KGPS350KW/0.2KHZ medium frequency power supply, set of profiling induction heater, set of reactive power compensation capacitor banks, set of far-infrared optical fiber temperature measurement systems, set of temperature closed-loop control system, and linear guide rails for horizontal movement of equipment. Three sets of general aluminum special supporting wheels, one set of inlet and outlet guide device and external control console, etc. This set of equipment is used for online heating of aluminum ingots. The rated power of the equipment is 350KW, the rated frequency is 200HZ, and the online temperature is raised to 80-100°C. For aluminum ingots with a cross-section of 2400 square millimeters, the output per hour is ≥4T, and the power consumption per ton of the equipment is about 50KWh. /t; The overall dimensions of the equipment are 2500×1000×1500mm (or determined according to user requirements), and the center height is 1.2 meters (adjustable). Our company has applied for an appearance patent for this shape. The total weight of the equipment is about 2.2T, and the water requirement is about 15t/h. The bottom of the equipment is designed with a linear guide rail that can move laterally about 1 meter to facilitate removal of the equipment when the multiplier heating is not needed. This equipment adopts the temperature closed-loop automatic control system (patent number ZL 2013.2.0793286.4) applied by our company (it is also designed with manual operation mode). The equipment can only be started after the aluminum ingot enters the furnace body. The output power of the equipment Automatically adjust according to the initial temperature of the aluminum ingot and the set final temperature. When the aluminum ingot stops in the furnace, the power of the equipment is automatically adjusted to the heat preservation state to prevent the aluminum ingot from over-burning. This frequency doubling heater equipment has the characteristics of high degree of automation, fast temperature increase speed, small temperature difference between the surface of the aluminum ingot core, energy saving and consumption reduction, and stable and reliable operation.